Optimize your Studio Workflow with the Ferrofish A32
In a growing professional studio, you inevitably run into a familiar problem: a shortage of high-quality analog inputs and outputs. When you’re working with outboard gear, analog summing or elaborate microphone setups, you don’t want to sacrifice audio quality or stability. The Ferrofish A32pro is i4studio’s preferred solution to this issue. This converter bridges the gap between your analog gear and the digital world with unprecedented efficiency, allowing you to route 32 channels of pristine audio in just a single rack unit.
Key features of the Ferrofish A32pro:
- 32×32 Balanced Analog I/O: Connect all your hardware via high-quality D-Sub25 connectors for noise-free signal transmission.
- Advanced MADI Integration: Supports up to 64 channels via optical or coaxial MADI, including convenient MIDI-over-MADI functionality.
- Outstanding AD/DA Conversion: Experience transparent sound with sample rates up to 192 kHz and impressive dynamic range.
- Intuitive User Interface: Four razor-sharp TFT color displays show you at a glance the input and output levels for all 64 channels.
- Powerful SHARC DSP: The internal processor effortlessly manages complex routing schemes and provides a jitter-free clock.
- Flexible ADAT ports: Features 4x ADAT I/O ports, allowing you to easily link smaller interfaces or digital mixers as well.
Why choose the Ferrofish A32pro at i4studio?
The Ferrofish A32pro is known for its rugged German build quality and unmatched reliability. Where other converters are often cluttered, the A32 gives you instant visual feedback. You no longer have to wade through complicated software menus; all essential settings are accessible directly on the unit. This saves you valuable time during intensive recording sessions.
Moreover, at i4studio, we understand that your system should never fail. That’s why the Ferrofish A32pro features a redundant power supply option. Whether you’re creating a complex mix for a film score or recording a full band simultaneously, the A32pro acts as the rock-solid foundation of your digital audio network. The combination of analog warmth and digital precision makes this the investment that takes your studio to the next level.
The Ferrofish A32pro works fine together with the RME digiface usb
Technical Specifications ferrofish a32Pro:
| Specification | Details |
|---|---|
| Channels | 32 Input / 32 Output (Analog) |
| Maximum Resolution | 24-bit / 192 kHz |
| Digital Connectivity | 4x ADAT I/O |
| Analog Connection | 8x D-Sub25 (Tascam Pinout) |
| Headphone output | Yes, with monitoring of all channels |
| EAN Number | 4313042884290 |
FAQ: Ferrofish A32pro & A32pro Dante
1. General Questions
What is the main difference between the A32pro and the A32pro Dante? The standard A32pro offers 32×32 analog I/O, ADAT and MADI (optional). The A32pro Dante also has an additional 64×64 interface for Dante networking. Both devices have the same analog circuitry and touchscreen controls.
Can I use the A32pro without a computer? Yes, the A32pro can function as a standalone converter. All settings, including the routing matrix and gain settings, can be adjusted directly on the device via the four TFT touch screens.
2. Audio & Connectivity
What analog connectors does the A32pro use? The unit uses D-Sub 25 connectors (Tascam pinout) for the 32 inputs and outputs. This saves space in the rack and ensures orderly cabling.
Does the A32pro support high sample rates? Sure. The A32pro supports sample rates up to 192 kHz. Note that higher rates via ADAT reduce the number of available channels (S/MUX):
44.1/48 kHz: 32 channels via ADAT
88.2/96 kHz: 16 channels via ADAT
176.4/192 kHz: 8 channels via ADAT (MADI and Dante retain more channels depending on configuration).
Are there microphone preamps in it? No, the A32pro is a pure line-level converter. For microphones, you need external pre-amps that send line-out signals to the A32pro.
3. Monitoring & Operation.
What are the two headphone outputs for? The A32pro has two independent headphone outputs on the front. You can use these to monitor any input or output signal (mono, stereo or submix) without affecting the main mix.
How does the Remote Control work? You can control the A32pro remotely in three ways:
USB: Via the RemoteFish software (Windows/macOS).
MIDI: Via standard MIDI commands.
MIDI-over-MADI: Ideal for long distances in studios or live productions.
4. Nutrition & Reliability
What happens if the power fails? The A32pro features redundant power supply. You can connect two external 12V power supplies. If one power supply fails, the other takes over seamlessly without interrupting the audio.
Will my settings remain after turning off? Yes, all routing and gain settings are automatically stored in internal memory and are immediately active again as soon as the device is powered up.
5. Advanced Features
What is the Routing Matrix? The internal matrix allows you to forward any input signal (Analog, ADAT, MADI, Dante) to any output. For example, you can send an analog signal to MADI and ADAT simultaneously for backup purposes.
Can I expand the MADI port? The A32pro has an SFP slot. This allows you to choose whether to insert an Optical Multi-mode or Single-mode SFP module, depending on the length of fiber optic cable you use.
Need Technical Help?
Firmware updates: Always check Ferrofish’s website for the latest version of firmware and RemoteFish software for best stability.
Clocking: For digital pairings, make sure one device is the ‘Master’ and the rest are on ‘Slave’ (via Wordclock, MADI or ADAT) to avoid digital ticks (clicks/pops).
Reviews
There are no reviews yet