Arturia Audiofuse X8 Out

Arturia AudioFuse X8 Out: The Smart Extension for your Analog Workflow

In a growing studio, there always comes a time when you run out of outputs. Perhaps you want to permanently connect a hardware compressor, build a 7.1 surround setup or provide several musicians with their own analog cue mix. The Arturia AudioFuse X8 Out solves this problem directly through the ADAT port of your current interface. Instead of investing in an entirely new, more expensive interface, simply plug in the X8 Out to instantly have eight additional, balanced, studio-quality line outputs.

Most important features

• 8 Additional Analog Outputs: High-quality, balanced TRS jacks to send your audio signals to the outside world.

• Premium Cirrus Logic Conversion: Experience transparent sound reproduction with extremely low noise level and wide dynamic range.

• Easy ADAT Integration: Works seamlessly with any audio interface that has an ADAT input.

• Word Clock Sync: Features Word Clock input for rock-solid synchronization with your central studio clock.

• Compact Half-Rack Size: Takes up minimal space; two units fit side by side in a standard 19-inch rack via the included connectors.

• Visual Monitoring: Clear VU meters on the front panel for quick monitoring of output levels per channel.

Why choose the Arturia AudioFuse X8 Out?

Choosing the Arturia AudioFuse X8 Out is a choice for efficiency and audio integrity. For the professional producer, this means that you can extend your DAW workflow into the analog world without the “coloration” that often occurs with cheaper converters. The X8 Out is designed to be invisible in your signal path, leaving only the pure character of your hardware processors or monitors.

At i4studio, we recommend the arturia AudioFuse X8 Out to anyone using an interface such as the AudioFuse 16Rig or similar units from other brands. It is the most cost-effective way to professionalize your I/O. Thanks to its rugged aluminum housing, this is a unit that will provide years of reliable service both in the fixed studio and in a mobile rig.

Technical specifications

Frequently asked questions (FAQ)

1. Can I use the X8 Out without another interface? No, the X8 Out is an expander. It needs a main unit (such as an AudioFuse or other interface with ADAT) to receive the digital signal from your computer.

2. Does this device also work with interfaces of other brands? Yes, the X8 Out follows the standard ADAT protocol and thus works with any brand of interface (such as RME, Focusrite or Universal Audio) that has an ADAT output.

3. Do I lose quality when using 96 kHz? The X8 Out supports S/MUX for higher sample rates. Note that at 88.2 or 96 kHz, the number of channels available through one ADAT port is halved to 4.

4. Is the Word Clock connection necessary? Only if your setup requires it. The X8 Out can also synchronize perfectly via the clock data contained in the ADAT signal, provided your interface is set as ‘Master’.

5. Can I mount two X8 units in one rack? Absolutely. The included rack ears and link plate allow you to place two X-Series units (for example, an X8 In and an X8 Out) side by side in a standard 1U rack space.