adhesive for acoustic panels
It is a high quality 1-component acrylic adhesive for wall and floor coatings without slip. The product is characterized by high adhesion to all surfaces. After drying, it forms a watertight, durable adhesive bond. Resistant to heavy loads and deformations and ensures a durable bond. The product is environmentally friendly and contains no solvents.
Made to European quality standards. NOTE: It is important that the surfaces to be bonded are properly cleaned, dried and degreased. One of the surfaces must necessarily have a fibrous or porous structure with a high absorption capacity of the elastic mounting adhesive. Very porous substrates must be pre-treated for good adhesion.
The glue can be applied evenly or a notched spatula can be used. The choice of mounting method depends on the type of surfaces to be bonded.
It is recommended to bond at an air temperature not lower than +10 ° C and a relative humidity of about 80%.
- CONSUMPTION: 200-800 g/m² depending on the surface condition of the material to be bonded and the method of application.
- SAFETY: The adhesive is fire and explosion proof. In case of contact with skin, rinse with water and in case of contact with eyes, rinse with plenty of water and seek medical advice if necessary.
- DRYING TIME: 12 hours at 20°C.
- COMPOSITION: styrene-acrylate dispersion, modifiers, adhesion promoters, fillers.
Storage: Glue should be stored in a tightly closed factory container at a temperature of +5 – +30°C, away from heat sources, open flames, avoid direct sunlight. To preserve the original properties of the adhesive, it is important to prevent freezing. Dispose of product residues in closed containers at locations with organized household waste collection.
Use is at your own risk
